Welcome to Changzhou bidafu plastic profile co., ltd! Main products: PC tube, PC lampshade, acrylic lampshade, etc
Changzhou bidafu plastic profile co., ltd

Professional Production of PC Tubes, Acrylic

Popular Keywords:


Contact Us
Address:Hutang Town, Changzhou City, Jiangsu Province
Email:[email protected]
Post Encoding:
What are the production processes of PC polycarbonate?

PC polycarbonate can be injected, extruded, moulded, blow moulded, hot moulded, printed, bonded, coated and machined. The most important processing method is injection moulding.

Pre-drying is necessary before forming. The moisture content should be less than 0.02%. Processing at high temperature will make the product white and turbid, silver wire and bubbles. PC has considerable ability of forcing high elastic deformation at room temperature. Because of its high impact toughness, it can be processed by cold pressing, cold drawing and cold roll pressing. Molecular weight of PC for extrusion should be more than 30,000. Gradual compression screw should be used with length-diameter ratio of 1:18-24 and compression ratio of 1:2.5. Extrusion blow moulding, injection-blow and injection-pull-blow moulding can be used to produce high quality and transparent bottles. There are many kinds of PC alloys, which can improve the defects of high melt viscosity (processability) and easy stress cracking of PC products. PC can form alloys or blends with different polymers to improve material properties. There are PC/ABS alloy, PC/ASA alloy, PC/PBT alloy, PC/PET alloy, PC/PET/elastomer blend, PC/MBS blend, PC/PTFE alloy, PC/PA alloy and so on, which have two advantages of material performance and lower cost. For example, PC/ABS alloy mainly contributes to high heat resistance, good toughness and impact strength, high strength and flame retardancy, while ABS can improve formability and apparent quality. Quantity, reduce density.

Return To The Top
双赢彩票娱乐 河北快3走势图 彩都会彩票网 盈多多彩票充值 春秋彩票充值 河北快3 139彩票充值 1博彩票充值中心 河北快3 江苏快3官网